Expedition Evans · video

Hva denne videoen dekker

A boat owner prepares to build a hard-top expedition enclosure by testing vacuum bagging techniques on a small fiberglass test piece.0:05 The project requires connecting a hard top to an existing hard dodger and dinghy davits, which will also support solar panels.0:12 The test layup follows a specific sequence: fiberglass, peel ply, perforated release film, absorbent bleeder fabric, and vacuum film, all sealed with sticky tape.9:11 The process uses Easy Composites epoxy, which the user notes has a significant viscosity difference between the resin and hardener but lacks strong odors.10:27 During the initial test, the vacuum pump was set too high, which pulled nearly all the resin out of the fiberglass, resulting in a bone-dry, brittle part.15:07 The test also revealed issues with corner sealing, as the vacuum bag leaked at the corners where the test piece created sharp points.12:43 Future attempts will require better corner technique and adjusted vacuum pressure to ensure proper resin saturation.12:47

Mer fra Expedition Evans

Woke Up...And Nature Chose VIOLENCE ( aka LEAVE NOW!) | EE 178sep. 2026We Disappeared... (Alone in the Remote Islands) | EE 177sep. 2026What It's Really Like Anchored Off a UNINHABITED Island | EE 176mai 2026Why Everyone is QUITTING Sailing | EE 175mai 2026

Fra Expedition Evans – se kanalens båt, mannskap og alle analyserte videoer.

The Sailing Directory Newsletter

Én e-post med flåtens beste funn – øyeblikkene, båtene og historiene som er verdt din seertid. Skriv inn din egen adresse for å få din egen kopi.