Tips from a Shipwright · video

Hva denne videoen dekker

Lofting the transom for the boat Orca requires transferring lines from a half-inch-to-the-foot scale drawing onto a full-scale loft floor.0:16 To prepare the floor, the surface is painted with TotalBoat Wet Edge topside paint, which allows for easy erasure of pencil lines.0:37 Measurements for the body plan are transferred from the drawing to the floor, where a batten is used to connect points marked by nails.1:37 The transom framework is constructed in two halves to accommodate the size of the loft floor.2:51 Quartered white oak is re-sawn and planed for the framework components.3:11 To ensure accuracy, a cardboard pattern is created by pressing it onto nail heads placed along the lofted lines, creating an impression that serves as a cutting guide.5:39 The oak pieces are cut using a bandsaw, with the technique of "nibbling" used to navigate tight curves and prevent blade binding.10:23 Final fitting requires careful tuning to ensure tight joints.11:49

Mer fra Tips from a Shipwright

Building Orca - Ep. 23: Mold FIVEmars 2026Progressive Bevelingfeb. 20261958 Harley Davidson Panhead Motorcycle - For Salefeb. 2026Building Orca - Ep. 22: Lofting Pt. 3 - Full Scale Linesjan. 2026

Fra Tips from a Shipwright – se kanalens båt, mannskap og alle analyserte videoer.

The Sailing Directory Newsletter

Én e-post med flåtens beste funn – øyeblikkene, båtene og historiene som er verdt din seertid. Skriv inn din egen adresse for å få din egen kopi.