Sampson Boat Co · video

Hva denne videoen dekker

Leo Goolden continues the restoration of the 109-year-old yacht Tally Ho by preparing and installing the fashion pieces, which connect the hull planking to the transom.0:43 Because these pieces are raked rather than plumb, they require complex beveling, which Goolden refines by referencing the lofting floor and transferring waterline marks.1:13 Installation involves letting the heel of each piece into the centerline by half an inch.3:48 Due to tight clearances near the frames, Goolden uses a forstner bit and chisels to cut the pockets rather than a router.4:27 A mishap occurs when the portside fashion piece falls from the boat, breaking a black locust trunnel at a joint; Goolden notes that while frustrating, the repair is manageable because trunnels primarily serve to maintain frame shape during construction rather than providing primary structural integrity.8:23 The project then shifts to fairing the frames in preparation for installing the bilge stringers and beam shelves, which will provide longitudinal rigidity and support the future deck structure.16:48

Mer fra Sampson Boat Co

Tally Ho sails into England after 59 years overseas!aug. 2026A very brief update from the Fal estuaryaug. 2026Piracy and Peril - stories from the boatyards of West Corkaug. 2026Tally Ho completes her Atlantic Crossing at the Fastnet Rock!aug. 2026

Fra Sampson Boat Co – se kanalens båt, mannskap og alle analyserte videoer.

The Sailing Directory Newsletter

Én e-post med flåtens beste funn – øyeblikkene, båtene og historiene som er verdt din seertid. Skriv inn din egen adresse for å få din egen kopi.