DrakeParagon · video

Hva denne videoen dekker

After a four-day passage from Gloucester to Lunenburg, the crew of the sailboat Paragon replaces a new jib that caused excessive rig vibration and damaged the roller furler.0:36 During the transit, the new sail’s incorrect sheet angle caused it to flog at the top, leading to two bolts backing out of the furler assembly.1:43 The captain repaired the furler underway using a spare bolt.1:58 While anchored in Lunenburg, the crew removes the problematic sail and reinstalls an older, larger jib to improve performance for the upcoming leg toward Newfoundland.2:07 The process involves securing the head and tack shackles with stainless steel seizing wire to prevent the hardware from vibrating loose or falling overboard.9:07 The crew also discusses the importance of checking for twists in the luff before hoisting the sail.7:59 Proper sail tension remains a challenge due to the boat's specific rig configuration, which does not accommodate the new jib's dimensions.3:18

Båter i denne videoen

Mer fra DrakeParagon

Voyage Planning for an Early Sail - Sailing from Spain to Tunisia, Part 11 | DrakeParagon Sailingokt. 2026This Broke...And I'm Okay With That? Sailing from Spain to Tunisia, Part 10 | DrakeParagon Sailingaug. 2026Ramming Speed! - Sailing from Spain to Tunisia, Part 9 | DrakeParagon Sailingaug. 2026Our Sailing Apps: Sailing from Spain to Tunisia, Part 8 | DrakeParagon Sailingaug. 2026

Fra DrakeParagon – se kanalens båt, mannskap og alle analyserte videoer.

The Sailing Directory Newsletter

Én e-post med flåtens beste funn – øyeblikkene, båtene og historiene som er verdt din seertid. Skriv inn din egen adresse for å få din egen kopi.