kentblairl · video

Hva denne videoen dekker

Kent Blair modifies the rudder and centerboard geometry for a 2017 Penobscot 14 named St. Jacques.Watch To facilitate beaching, he drills the rudder to allow it to flip upward, noting that the boat’s reverse transom requires the rudder to sit high when retracted.0:28 He plans to attach a control line to the leading edge of the rudder to pull it down and extend it once the boat is back underway.0:42 For the centerboard, he profiles the edges by copying the geometry of a Sunfish daggerboard.0:52 Using a belt sander, he tapers the board from a thickness of one inch down to an eighth-inch edge on both sides.1:00 After sanding, he prepares the components for varnishing and readies the centerboard case for installation into the hull.1:27

Mer fra kentblairl

Bahamas Dinghy HENNING Tape Removalsep. 2026Nutshell Pram Tiller Repair IIjuni 2026Nutshell Pram Tiller Repairjuni 2026Bottle Jack Servicingmai 2026

Fra kentblairl – se kanalens båt, mannskap og alle analyserte videoer.

The Sailing Directory Newsletter

Én e-post med flåtens beste funn – øyeblikkene, båtene og historiene som er verdt din seertid. Skriv inn din egen adresse for å få din egen kopi.