BoatworksToday · video

Hva denne videoen dekker

Andy corrects a structural error on a custom hatch cover for a Bertram Moppie project by removing and replacing an off-center stringer.▶ 3:32 After identifying that the original center stringer sat one inch off-center, he cuts a new, properly aligned support to ensure the hatch openings remain clear.▶ 4:28 He bonds the new stringer using Fix-O-Flex, a pre-thickened, flexible filler chosen to withstand vibration and shock.▶ 12:55 The fairing process involves multiple thin applications of fairing compound, using progressively wider trowels to achieve a consistent profile.▶ 9:49 Between applications, he sands the surface with 60-grit sandpaper to scuff the area and identify low spots, which appear as darker patches against the sanded, lighter surface.▶ 14:57 He also applies fairing compound to the port and starboard pockets to address minor gaps.▶ 16:02 Proper alignment and thin, layered applications of fairing compound minimize the need for excessive sanding.

Mer fra BoatworksToday

Putting the Anona Orbis Solar Camera to Work on My Property ~ 360 Security Camerajuli 2026I Wasn't Sure This Would Work | 42 Hour BBQ on Solar Power | Jackery HomePower 3600 Plus!juli 2026Keel Faired, Barrier Coat Applied ~ Last Hurdle Before Building the Interior Of This Sailboat!juni 2026Everything Fits! ~ Coosa Bulkheads, New Soles & Closing Out The Old Thruhulls!juni 2026

Fra BoatworksToday – se kanalens båt, mannskap og alle analyserte videoer.

The Sailing Directory Newsletter

Én e-post med flåtens beste funn – øyeblikkene, båtene og historiene som er verdt din seertid. Skriv inn din egen adresse for å få din egen kopi.