Yourbestsail · video

Hva denne videoen dekker

Routine VHF radio communication between vessels requires initiating contact on channel 16, the international hailing and distress frequency.0:38 Before transmitting, operators must verify the radio is set to low power—typically one watt—to minimize interference and ensure the channel is clear of ongoing traffic.2:41 Regulations prohibit routine calls during the first three minutes of every hour and the first three minutes of every half-hour.1:32 Once the called vessel acknowledges, both parties must immediately switch to a designated working channel to conduct the conversation.3:30 Recommended simplex working channels for boat-to-boat communication include 72 and 77, as duplex channels are technically unsuitable for direct vessel-to-vessel contact.6:05 In this demonstration, the vessel Oriol Star contacts Tiburón 2 on channel 16, confirms a working channel, and completes a radio check before returning to channel 16.3:15 Proper procedure dictates that channel 16 serves exclusively for initial hailing and distress, never for extended conversation.5:11

Mer fra Yourbestsail

The genoa sheet car (Again!)sep. 2026The function of the centerboardaug. 2026Marinas and Yacht Clubs: Proceduresaug. 2026The 10 most common mistakes when docking a boatjuni 2026

Fra Yourbestsail – se kanalens båt, mannskap og alle analyserte videoer.

The Sailing Directory Newsletter

Én e-post med flåtens beste funn – øyeblikkene, båtene og historiene som er verdt din seertid. Skriv inn din egen adresse for å få din egen kopi.