Classic Yacht TV · video

Hva denne videoen dekker

Hull planking on the schooner Malabar IV reaches an active stage in early November, with steam-bending the primary technique for fitting planks that carry significant twist from amidships to the sternpost.0:18 The builder test-fits each plank dry first, checking the run along its full length to identify high spots, dips, and caulking seams that need adjustment before steaming, because correcting edge set after bending becomes much harder.3:50 Planks with heavy twist at the stern are left clamped loosely on the boat, bagged, and steamed in situ so they take the hull's compound shape under heat.3:09 Deck structure is also progressing: beam shelves, beams, and carlins are fastened with traditional copper rivets through the frames and planking, and mast partners and blocking between deck beams are fitted to carry structural loads at the mast partners and deck fittings.2:00 The sequence — dry fit, assess, steam, clamp — confirms that checking plank alignment before applying heat prevents wasted timber and avoids forcing corrections on an already-set plank.

Mer fra Classic Yacht TV

EP13 Fastnet update | Interior layout: Building the schooner MALABAR IVmai 2026EP11 shaping planks: : Building the schooner Malabar IVjan. 2026EP10 Steaming and fitting Green Oak frames: Building the schooner Malabar IVjan. 2026EP09 Positioning laminated floors and frames, summer recap #3: Building the schooner Malabar IVdes. 2025

Fra Classic Yacht TV – se kanalens båt, mannskap og alle analyserte videoer.

The Sailing Directory Newsletter

Én e-post med flåtens beste funn – øyeblikkene, båtene og historiene som er verdt din seertid. Skriv inn din egen adresse for å få din egen kopi.