Piratas Aderiva · video

Hva denne videoen dekker

Jorman replaces the old windows on his sailboat with new polycarbonate sheets, opting to secure them primarily with 3M adhesive tape rather than the original screw-heavy mounting method.▶ 0:48 He retains a small border on the polycarbonate sheets to provide sufficient surface area for the tape, as the original screw holes are too close to the edge.▶ 0:48 To ensure structural security, he installs four to five screws per window as a secondary measure, significantly reducing the total number of fasteners from the original 72 used on the lower windows.▶ 7:31 He shapes the polycarbonate using a Botch angle grinder with a sanding disc and drills mounting holes with a standard drill.▶ 3:33 Throughout the process, he wears a protective face shield with UV protection to guard against flying debris.▶ 3:53 The protective film remains on the polycarbonate sheets during installation to prevent scratching.▶ 6:43 This method aims to improve the vessel's watertight integrity while simplifying the mounting process.

Mer fra Piratas Aderiva

The Solution to the Housing Crisis: Living on a Boat 🚤apr. 2026⚓ REVIVING THE DINGHY CHALLENGE – EPISODE 2 | The story behind our Fatty Kneesfeb. 2026What Moving a Sailboat Really Entails | Part 3 FINALfeb. 2026What Moving a Sailboat Really Entails | Part 2feb. 2026

Fra Piratas Aderiva – se kanalens båt, mannskap og alle analyserte videoer.

The Sailing Directory Newsletter

Én e-post med flåtens beste funn – øyeblikkene, båtene og historiene som er verdt din seertid. Skriv inn din egen adresse for å få din egen kopi.