MJ Sailingvideo
The Victron Electrical Install Begins! (Major Milestone for Our Self Built Catamaran) - Episode 373
28. mars 2026 · 22 min · 29K visninger · Kent Island
Two crew lift green hull panel onto catamaran in workshop
Hva denne videoen dekker
Matt installs a 48-volt electrical system on a self-built catamaran using Victron components, including two MultiPlus-II inverters and Lynx distributors.4:26 To mount the heavy inverters onto a structural fiberglass bulkhead without through-bolting, he drills holes, de-cores the area, and uses octagonal threaded inserts set in thickened epoxy with chopped strand.5:42 This method creates a solid, removable mounting point that prevents the fasteners from pulling out.9:19 For the AC side, he installs Eaton breakers and a 50-amp ELCI/RCBO to accommodate the combined power output of the dual inverters, which exceeds the capacity of a standard 30-amp shore power connection.21:33 Separately, the crew prepares the aft guest berth overhead for vinyl paneling by marking and bonding Starboard support blocks to the fiberglass.11:00 They use a laser level to align these blocks along the hull’s curvature and plan to secure the panels using drywall-style fasteners for added strength.11:32
Mer fra MJ Sailing
Fra MJ Sailing – se kanalens båt, mannskap og alle analyserte videoer.
The Sailing Directory Newsletter
Én e-post med flåtens beste funn – øyeblikkene, båtene og historiene som er verdt din seertid. Skriv inn din egen adresse for å få din egen kopi.