Living For Sail · video

Hva denne videoen dekker

The owner of the 38-ft sailboat Antidote fabricates new deck prism housings using epoxy and vacuum bagging after initial attempts with polyester resin failed to bond properly.0:55 To secure the trim rings to the new fiberglass deck, the owner tests the pull-out strength of M5 machine screws threaded directly into G10 laminate blocks.7:25 Using a shop press and a 500-kilogram load cell, the tests confirm that 1/4-inch thick G10 holds over 2,000 pounds of force without thread failure, significantly outperforming traditional wood screws in plywood.14:21 The owner uses a router template and a solid carbide fiberglass-cutting burr to cut the final openings in the housings.24:26 The process includes using a foot-operated switch for the drill press to ensure straight tapping of the G10 mounting holes.22:09 The project concludes with the successful removal of the cured part from the mold, aided by a PVA release agent.21:08 Testing confirms that tapping G10 laminate provides a secure, inert mounting point for deck hardware that resists water intrusion.15:55

Båter i denne videoen

Mer fra Living For Sail

BACK to Work on ANTIDOTE! - How I Used 3D Printing to Fix My Boataug. 2026⛵️ I Tried Boiling Water Out of My Boat... It Actually Worked - sort of?!juli 2026⛵️ This DIY Sailboat Repair Has To Work... Right?juni 2026Uh oh... 2 Reasons why there is No New Video Today...mai 2026

Fra Living For Sail – se kanalens båt, mannskap og alle analyserte videoer.

The Sailing Directory Newsletter

Én e-post med flåtens beste funn – øyeblikkene, båtene og historiene som er verdt din seertid. Skriv inn din egen adresse for å få din egen kopi.