SVN solovelanetvideo
Mooring equipment for sailboats
13. mai 2025 · 15 min · 44K visninger · Marina d'Arechi, Salerno
Hva denne videoen dekker
Polyester remains the preferred material for mooring lines due to its UV resistance, elasticity, and durability, while nylon is unsuitable for Mediterranean conditions due to rapid UV degradation.3:44 For a 14-meter vessel, a 16mm to 18mm diameter line is recommended.5:13 Lines with a protective sheath reduce noise caused by friction against cleats.4:17 Mooring setups require specific configurations: permanent "bozze" lines equipped with a chain segment to prevent chafe against dock edges, and standard lines for temporary docking.5:45 A 15-meter length suffices for most stern lines, while "traversini" (cross-lines) should measure 1.5 times the boat's beam.8:13 Spring lines used for side-to docking require a length of 1.5 times the boat's overall length.9:19 A long "cimone" of at least 30 meters serves as a safety line for towing or emergency mooring.9:36 Rubber or spring-based shock absorbers mitigate surge in marinas with heavy swell.10:15 Specialized boat hooks, such as the 208-euro model, facilitate single-handed mooring by allowing the crew to loop lines around cleats without assistance from the dock.12:56
Mer fra SVN solovelanet
Fra SVN solovelanet – se kanalens båt, mannskap og alle analyserte videoer.
The Sailing Directory Newsletter
Én e-post med flåtens beste funn – øyeblikkene, båtene og historiene som er verdt din seertid. Skriv inn din egen adresse for å få din egen kopi.



