A Boat in the Woods · video

Hva denne videoen dekker

Steam bending hemlock 1×4 outwales onto a wooden boat hull is the central work here, with Joshua modifying a steam box, removing chainplates, and reinforcing the hull for a coming interior teardown.0:15 He cut a 10-foot steam box extension down to just over 2 feet to reduce heated volume, wrapped the box in reflective bubble wrap insulation and thrift-store blankets, and confirmed 13 feet of usable length — enough for the longest frame at 12 feet.1:54 The temporary outwales mirror the interior build stringers and shear clamps so the hull won't collapse once those are removed. Chainplate removal required grinding plated-bronze acorn nuts after carriage bolts spun in their bores; a vise-grip trick on the starboard side avoided the grinder entirely.15:15 The backing block came off revealing dry rot across its entire back face from rainwater intrusion.17:43 A hanging knee — apparently the only one in the boat — was also removed, with stripped screws drilled out.22:27 Joshua closes by announcing he will stop work at this location to build a proper boat shed before continuing the rebuild.25:24

Mer fra A Boat in the Woods

Solo Boat Shed Build | 1 Side Roof Down, 1 to Go - No. 50okt. 2026Boat Shed Posts & Beams, Back to Work on the Boat - No. 50okt. 2026I Left the Woods to Learn How to Fix My Boatsep. 2026Finishing the Roof & The Boat is Finally Home - No. 47sep. 2026

Fra A Boat in the Woods – se kanalens båt, mannskap og alle analyserte videoer.

The Sailing Directory Newsletter

Én e-post med flåtens beste funn – øyeblikkene, båtene og historiene som er verdt din seertid. Skriv inn din egen adresse for å få din egen kopi.