BoatHowTo · video

Hva denne videoen dekker

Nigel Calder advises that standard automotive battery testers fail to accurately assess marine house batteries because they are designed for cranking duty cycles rather than deep-cycle discharge.0:48 To determine the true health of a house battery, perform a full capacity test by first charging the battery to 100%, then discharging it at a controlled rate while measuring the time taken to reach a specific voltage.1:16 If the remaining capacity falls below 80%, the battery is likely nearing the end of its service life.1:40 Calder recommends conducting this test every two years and emphasizes testing even brand-new batteries, as they may have suffered from sulfation while sitting on a retailer's shelf for years.1:55 Retailers often rely on inaccurate, quick-read meters that do not reflect the actual capacity of deep-cycle units.2:53 Verifying the manufacturing date code before purchase helps avoid buying aged stock.2:15 A full capacity test provides the only reliable metric for determining if a battery bank can support a planned cruise.0:38

Mer fra BoatHowTo

MaxProp: More Pitch in Reverse than in Forward? 🤔 | Ask The Expert with NIGEL CALDERsep. 2026Common Ground Point with Isolated Saildrives | Ask The Expert with NIGEL CALDERsep. 2026How to keep you TANK CLEAN in the days of BIODIESEL.. | Ask The Expert with NIGEL CALDERaug. 2026PARALLELING Conductors for AMPACITY - is that SAFE?? | Ask The Expert with NIGEL CALDERaug. 2026

Fra BoatHowTo – se kanalens båt, mannskap og alle analyserte videoer.

The Sailing Directory Newsletter

Én e-post med flåtens beste funn – øyeblikkene, båtene og historiene som er verdt din seertid. Skriv inn din egen adresse for å få din egen kopi.