Yourbestsail · video

Hva denne videoen dekker

Executing a clean tack requires maintaining boat speed, precise timing by the helm, and coordinated work by the headsail trimmers. Before initiating the maneuver, the helmsman must ensure the boat is at a close-hauled point of sail with sufficient momentum.0:39 To maintain a consistent heading after the turn, the helmsman should identify a visual reference point approximately 120 degrees from the current heading—calculated as 90 degrees plus an additional 30 degrees to account for the loss of speed and the need to regain a close-hauled course.4:22

The leeward trimmer must not release the genoa sheet until the sail begins to luff, ensuring the boat retains maximum drive through the dead zone.7:35 Simultaneously, the windward trimmer should prepare by taking two wraps around the winch.9:55 Once the sail passes the centerline, the windward trimmer must pull the sheet in rapidly by hand before securing it on the winch.9:59 Practicing these steps ensures the maneuver remains efficient for both racing and emergency collision avoidance.16:12

Mer fra Yourbestsail

Marinas and Yacht Clubs: Proceduresaug. 2026The 10 most common mistakes when docking a boatjuni 2026Anchoring: wave diffractionjuni 2026ORIOL STAR: Interior Walkthroughjuni 2026

Fra Yourbestsail – se kanalens båt, mannskap og alle analyserte videoer.

The Sailing Directory Newsletter

Én e-post med flåtens beste funn – øyeblikkene, båtene og historiene som er verdt din seertid. Skriv inn din egen adresse for å få din egen kopi.