Sailing Magic Carpet · video

Hva denne videoen dekker

Restoring the oxidized gel coat on a Cape George cutter 36 requires a multi-step process of sanding and buffing to remove the weathered surface layer. The crew uses 1500-grit sanding discs on a foam pad to ensure even pressure and prevent sanding through the original factory gel coat.4:41 Following the sanding, they apply a rubbing compound with a buffing machine, finished with a polishing compound to restore the original gloss.11:41 The process is labor-intensive and requires significant time to achieve a uniform shine across the entire hull.7:24 Before removing the protective shed covering the boat, the crew completes final waterproofing tasks on the cabin top, including installing new hinges and latches.9:03 With the hull polished and the exterior sealed, the crew dismantles the shed to expose the vessel for the first time since its transport to Canada.15:29 Regular hand polishing after the initial restoration helps maintain the gel coat's finish and extends the life of the buffing work.6:44

Båter i denne videoen

Mer fra Sailing Magic Carpet

We're Starting to Lose Our Mindsokt. 2026We Found An Old Map Leading Us To Hotsprings...okt. 2026A Mysterious Presence on this Northern Islandsep. 2026Sailing Northern Canada | Alone and at Peacesep. 2026

Fra Sailing Magic Carpet – se kanalens båt, mannskap og alle analyserte videoer.

The Sailing Directory Newsletter

Én e-post med flåtens beste funn – øyeblikkene, båtene og historiene som er verdt din seertid. Skriv inn din egen adresse for å få din egen kopi.