Yourbestsail · video

Hva denne videoen dekker

Tensioning the backstay on a fractional rig bends the mast forward at its center, stretching the mainsail's luff away from the leech across a wide surface area and flattening the sail more effectively than tensioning the cunningham alone.5:01 The mast's bend pivot point is where the forestay meets the spar; above that point the masthead moves aft under backstay load, below it the mast bows forward.4:29 Flattening reduces drive and also slackens the leech, increasing twist and depowering the upper sail — useful in freshening wind, particularly in racing where reefing is avoided.5:32 On cruising boats, the recommended response to increasing wind remains reefing early, not backstay adjustment.7:30 A secondary effect on fractional rigs is a modest increase in forestay tension, which reduces headsail sag and slightly flattens the genoa.11:12 One practical caution: on in-mast furling mainsails, the mast must be straightened before reefing, because a curved mast causes the sail to furl unevenly or jam.8:39 The distinction between full-hoist rigs (where backstay tension has little effect) and fractional rigs (where it is significant) is central to the explanation.1:32

Mer fra Yourbestsail

Sailing downwind in wavesokt. 2026The genoa sheet car (Again!)sep. 2026The function of the centerboardaug. 2026Marinas and Yacht Clubs: Proceduresaug. 2026

Fra Yourbestsail – se kanalens båt, mannskap og alle analyserte videoer.

The Sailing Directory Newsletter

Én e-post med flåtens beste funn – øyeblikkene, båtene og historiene som er verdt din seertid. Skriv inn din egen adresse for å få din egen kopi.