BoatworksToday · video

Hva denne videoen dekker

A 1-1/8 inch by 21-inch belt sander serves as a primary tool for fiberglass boat repairs, particularly for shaping, prepping stress cracks, and removing gel coat around hardware holes.0:41 The long-neck design allows access to tight cockpit and cabin spaces, while the tool's head diameter matches common boat radii.0:54 Variable speed control is essential for finesse work, as running the sander at low speeds improves material removal accuracy and dust collection efficiency.1:42 When using the tool for surface preparation, holding a vacuum hose directly behind the belt captures 90-95% of airborne dust.3:15 For fiberglass layup prep, 36 to 40-grit belts provide the most effective material removal, while 80 to 120-grit belts suit fairing compounds.10:00 A wider 1-1/8 inch belt offers better stability and prevents the surface scalloping often caused by narrower 3/8 inch models.6:13 While professional-grade units like the Makita model remain durable over 15 years of heavy use, lower-cost alternatives are viable for one-off projects provided they feature variable speed and the wider belt width.7:19

Mer fra BoatworksToday

Why Is My 920Ah Sailboat Battery Bank So Big FOR THIS TINY SAILBOAT?? This Is Why ;-)!okt. 2026New Epoch Batteries Just Landed for My Victron System But It's On Hold For Annapolis Boat Show Prep!sep. 2026I Was Wrong About My Boat's Victron Wiring (You Were Right!)sep. 2026Will This Entire Victron Electrical System Fit In My Little Boat?aug. 2026

Fra BoatworksToday – se kanalens båt, mannskap og alle analyserte videoer.

The Sailing Directory Newsletter

Én e-post med flåtens beste funn – øyeblikkene, båtene og historiene som er verdt din seertid. Skriv inn din egen adresse for å få din egen kopi.