Living For Sail · video

Hva denne videoen dekker

The restoration of the forward chain locker on the 35-year-old sailboat *Antidote* involves reinstalling original teak deck beams and fabricating new support structures.0:22 After verifying the moisture content of the 2-inch by 2-inch teak beams with a Skipper Plus moisture meter, the owner cleans the wood with acetone and bonds the beams to the hull using 316 stainless steel screws and epoxy thickened with 406 colloidal silica.15:10 To improve access and storage, the project includes installing a new center support beam made from 6061 aluminum box tubing and replacing the original HDPE deck panels with Kusa composite board.10:09 The owner plans to offset the chain pipe toward the port side to increase usable locker space, despite the added complexity of the pipe run.8:26 The process emphasizes structural integrity through epoxy bonding and the use of rot-resistant materials like Kusa for new deck skins.16:14

Båter i denne videoen

Mer fra Living For Sail

This Was Inside The Boat!? — Should I Put It Back?sep. 2026BACK to Work on ANTIDOTE! - How I Used 3D Printing to Fix My Boataug. 2026⛵️ I Tried Boiling Water Out of My Boat... It Actually Worked - sort of?!juli 2026⛵️ This DIY Sailboat Repair Has To Work... Right?juni 2026

Fra Living For Sail – se kanalens båt, mannskap og alle analyserte videoer.

The Sailing Directory Newsletter

Én e-post med flåtens beste funn – øyeblikkene, båtene og historiene som er verdt din seertid. Skriv inn din egen adresse for å få din egen kopi.