How to tune up your electric planer for best results!
5. oktober 2018 · 31 min · 396K visninger
Hva denne videoen dekker
Louis Sauzedde modifies a Ryobi electric planer to improve its performance for heavy-duty boatbuilding tasks, specifically fairing hulls and cutting scarfs in wet wood.2:43 To prevent the tool from gouging workpieces when tilted, he grinds the corners of the carbide blades and the pressure bar to a 30-degree taper, ensuring the cutting edges do not extend beyond the base.11:36 He emphasizes the importance of balancing the two pressure bar assemblies to prevent vibration, using a makeshift scale to ensure they weigh exactly the same.12:05 To improve chip ejection, he removes the internal flapper switch, which he finds restricts airflow and causes jams, particularly when working with wet cedar or mahogany.22:29 He prefers this specific Ryobi model because its infeed table adjusts vertically rather than on an inclined plane, allowing for precise, flat cuts.19:07 He warns against using older, dangerous models like the Porter-Cable planer and stresses that these modifications are essential for achieving professional-grade results in marine carpentry.29:59
Mer fra Tips from a Shipwright
Fra Tips from a Shipwright – se kanalens båt, mannskap og alle analyserte videoer.
The Sailing Directory Newsletter
Én e-post med flåtens beste funn – øyeblikkene, båtene og historiene som er verdt din seertid. Skriv inn din egen adresse for å få din egen kopi.