kentblairl · video

Hva denne videoen dekker

Kent Blair repairs hull damage on a 1965 Alcort Catfish by installing fiberglass patches over a pre-installed backer.0:10 He uses Thixo-Pro thickened epoxy adhesive to fill the voids and wet out layers of woven roving fiberglass cloth.0:16 To prepare the repair area, he cuts back to clean fiberglass and feathers the edges to create a transition for the new material.3:15 He applies smaller patches to fill the hole depth, followed by larger patches that overlap the feathered edges to restore structural integrity.2:32 The repair process involves working the epoxy into the cloth until the weave appears opaque, indicating full saturation.1:11 Once the epoxy cures, the surface will be sanded level to accommodate a final finish.6:33 For the cosmetic topcoat, he plans to use Rust-Oleum spray paint, which allows for future removal if a professional gel coat restoration is desired.5:52 The epoxy also serves as a temporary sealant for exposed fiberglass flakes elsewhere on the hull.7:36

Båter i denne videoen

Mer fra kentblairl

Bahamas Dinghy HENNING Tape Removalsep. 2026Nutshell Pram Tiller Repair IIjuni 2026Nutshell Pram Tiller Repairjuni 2026Bottle Jack Servicingmai 2026

Fra kentblairl – se kanalens båt, mannskap og alle analyserte videoer.

The Sailing Directory Newsletter

Én e-post med flåtens beste funn – øyeblikkene, båtene og historiene som er verdt din seertid. Skriv inn din egen adresse for å få din egen kopi.