Ravenswing · video

Hva denne videoen dekker

Painting a Farrier F25C trimaran requires a systematic approach to surface preparation and application using Alexseal products. The process involves applying a gray primer to mask inconsistencies between carbon fiber and fiberglass surfaces, followed by Alexseal TopCoat 501 in an off-white finish.9:03 To achieve a smooth finish without tipping, the application uses a roll-on method with a specific roll additive mixed at 10 milliliters per quart of paint.10:21 Red Tree foam rollers are used for the topcoat, while fabric rollers are required for the more aggressive primer solvents.11:17 Between coats, the surface is wet-sanded with 320-grit paper to ensure proper adhesion.2:26 The project also includes installing Comigo synthetic rigging terminals into custom carbon chain plates, which requires precise notching of the plates using a drill and an oscillating tool.5:27 The final finish is achieved after three coats, though minor buffing may be necessary to remove debris trapped during the curing process.12:55 Proper surface cleaning and temperature control are critical to preventing air bubbles and splotchy finishes.1:09

Mer fra Ravenswing

F32R carbon tri build project for saleokt. 2026A Labrador & her people go sailingdes. 2025An Uncle meets his Nephew sailing, part 2nov. 2025An uncle meets his nephew during a sailing cruiseokt. 2025

Fra Ravenswing – se kanalens båt, mannskap og alle analyserte videoer.

The Sailing Directory Newsletter

Én e-post med flåtens beste funn – øyeblikkene, båtene og historiene som er verdt din seertid. Skriv inn din egen adresse for å få din egen kopi.