BoatworksToday · video

Hva denne videoen dekker

Replacing an existing 80-gallon fiberglass fuel tank in a Bertram project boat offers significant weight savings and long-term reliability benefits over retaining the current unit. The original fiberglass tank, while potentially constructed with ethanol-resistant resin, presents a liability for future resale due to historical issues with polyester resin degradation in modern ethanol-blended fuels. Switching to an aluminum tank would reduce the vessel's overall weight, which is critical because the current static waterline sits within one inch of the scuppers. Furthermore, an aluminum tank allows for increased fuel capacity without adding weight, as the current fiberglass tank weighs approximately 300 pounds. The project involves converting the boat from twin inboards to twin Honda 130 outboards mounted on an Armstrong bracket, shifting weight aft and necessitating careful management of the center of gravity. Future steps include sourcing quotes from metal fabricators to determine if the cost of a custom aluminum tank justifies replacing the existing fiberglass unit.

Mer fra BoatworksToday

Will This Entire Victron Electrical System Fit In My Little Boat?aug. 2026The Primer Mistake You're Probably Making Painting Your Boat: Film Thickness, Not Smoothness!aug. 2026V-Berth Electrical Layout On A Small Sailboat: It's Tight, But It Should Work!aug. 2026Putting the Anona Orbis Solar Camera to Work on My Property ~ 360 Security Camerajuli 2026

Fra BoatworksToday – se kanalens båt, mannskap og alle analyserte videoer.

The Sailing Directory Newsletter

Én e-post med flåtens beste funn – øyeblikkene, båtene og historiene som er verdt din seertid. Skriv inn din egen adresse for å få din egen kopi.