Sailing Yabá · video

Hva denne videoen dekker

The crew of the wooden sailboat Yabá installs a two-inch bronze through-hull fitting for the engine’s raw-water cooling system.11:08 After initially planning to share a single large through-hull between the watermaker and the engine, the crew decides to keep the systems separate to prevent vacuum issues and potential watermaker damage.8:47 They position a custom-welded stainless steel raw-water filter to allow for a straight hose run, minimizing the use of elbow joints.7:55 Because a two-inch hole saw is unavailable, the crew drills a series of small holes around the perimeter of the marked circle and uses a jigsaw to remove the center plug from the hull planking.13:51 They seal the exposed wood inside the hole with thickened epoxy to prevent rot.20:12 The project also includes priming the newly welded keel plates with epoxy to prevent corrosion and cleaning the metal surfaces with Scotch-Brite before final coating.21:02

Mer fra Sailing Yabá

Is a Huge Crew Always Better? (Bittersweet Voyage Surrounded by Whales) — Sailing Yabáokt. 2026Yabá gets Brand New Sails & Set Sail Immediately!— Sailing Yabáokt. 2026Everything Has to be Perfect: Preparing the Rig for Brand New Sails — Sailing Yabásep. 2026Our Sails Ripped on Their Last Journey Before a Massive Upgrade! — Sailing Yabásep. 2026

Fra Sailing Yabá – se kanalens båt, mannskap og alle analyserte videoer.

The Sailing Directory Newsletter

Én e-post med flåtens beste funn – øyeblikkene, båtene og historiene som er verdt din seertid. Skriv inn din egen adresse for å få din egen kopi.