Wildling Sailing · video

Hva denne videoen dekker

The owner of a Freedom 35 catamaran constructs a custom boom using pine timber and hardwood side strips to achieve a T-section profile.10:39 To ensure structural integrity under sail pressure, the project involves dry-fitting the components, bonding them with epoxy and microfibers, and planning for a future fiberglass lamination.19:31 The builder utilizes repurposed chain plates as brackets for the gooseneck connection, noting the difficulty of aligning bolt holes in timber without a pillar drill.3:05 Additionally, the project includes replacing a faulty engine rectifier to stabilize charging voltage at approximately 14 volts.31:01 The engine also exhibits signs of a failing fuel pump, which causes hard starting.32:13 Work on the boom remains paused due to cold temperatures, as the epoxy requires a minimum of 5 degrees Celsius to cure.15:31 Future plans include installing an autopilot and addressing the fuel pump issue.35:31

Mer fra Wildling Sailing

One Final Refit Before Crossing The Atlantic.aug. 20262 Days Alone at Sea On my Primitive Double-Canoe.aug. 2026A Night Passage Through Orca Territoryjuli 2026Getting Very Comfortable Solo Sailing My Big Catamaranjuli 2026

Fra Wildling Sailing – se kanalens båt, mannskap og alle analyserte videoer.

The Sailing Directory Newsletter

Én e-post med flåtens beste funn – øyeblikkene, båtene og historiene som er verdt din seertid. Skriv inn din egen adresse for å få din egen kopi.