Sampson Boat Co · video

Hva denne videoen dekker

Lining out a hull involves determining the precise position and width of each plank to ensure structural integrity, aesthetic balance, and efficient use of material.0:21 For the 110-year-old yacht Tally Ho, the process requires using long, stiff battens to mark the hull, ensuring planks taper smoothly toward the bow and stern while maintaining sufficient width at the hood ends for secure fastening.13:02 Proper lining prevents excessive edge set, which occurs when planks are cut with too much curve, forcing them to bend in ways that complicate installation.12:32 Tim Lee, a shipwright from the Port Townsend Shipwrights Co-op, assists in the layout, emphasizing the need to account for tight curves at the turn of the bilge and the tuck under the transom.13:21 By measuring original planking as a guide and using a consistent system of measurement, the team divides the hull into sections to ensure uniform plank widths.25:14 Careful planning during the lining-out phase minimizes waste and ensures the final planking follows the boat's lines elegantly.

Mer fra Sampson Boat Co

Tally Ho sails into England after 59 years overseas!aug. 2026A very brief update from the Fal estuaryaug. 2026Piracy and Peril - stories from the boatyards of West Corkaug. 2026Tally Ho completes her Atlantic Crossing at the Fastnet Rock!aug. 2026

Fra Sampson Boat Co – se kanalens båt, mannskap og alle analyserte videoer.

The Sailing Directory Newsletter

Én e-post med flåtens beste funn – øyeblikkene, båtene og historiene som er verdt din seertid. Skriv inn din egen adresse for å få din egen kopi.