Acorn To Arabella · video

Hva denne videoen dekker

Steve and Aaron install cedar hull planks on the wooden boat Arabella, focusing on the complex transition where the oak steeler meets the cedar planking.6:35 Because the frames are too narrow to support a butt joint, they install locust butt blocks to back the nibbed joints.6:57 To ensure precise alignment, they drill pilot holes from the inside of the hull before installing the blocks, then bed the surfaces with Dolphinite and secure them with bronze rivets.13:06 The crew chamfers the top edges of the butt blocks to prevent debris accumulation in the engine bay.8:17 After completing the initial spiled planks, they transition to narrower, straight-grained cedar planks, using a diminishing process to calculate plank widths at each station.15:33 They also perform knot repairs on the lower planks using graving pieces.17:27 Due to the COVID-19 pandemic, the crew cancels their annual May open house but secures a bulk supply of bronze fasteners, epoxy, and paint from Jamestown Distributors to continue construction through the summer.21:47

Mer fra Acorn To Arabella

Saying Goodbye to Newfoundland—and the Man Who Inspired Arabellasep. 2026Upgrading the Rudder and Another Trek To The Cliffaug. 2026We're Climbing a Wall No One Has Ever Climbed Before | Rock Climbing on Newfoundland's South Coastjuli 2026Exploring Newfoundland's Unclimbed Coastal Cliffs by Sailboatjuli 2026

Fra Acorn To Arabella – se kanalens båt, mannskap og alle analyserte videoer.

The Sailing Directory Newsletter

Én e-post med flåtens beste funn – øyeblikkene, båtene og historiene som er verdt din seertid. Skriv inn din egen adresse for å få din egen kopi.