VOILIER ODIN · video

Hva denne videoen dekker

To improve the holding performance of a CQR anchor, the owner of the boat Odin modifies the anchor by welding a 12-centimeter steel rock point to the tip of the fluke.16:46 The modification aims to force the anchor to engage with the seabed immediately upon contact, preventing the common tendency of CQR anchors to skate or drag before setting.11:18 The owner reports that this technique, previously tested on a smaller vessel, significantly improves reliability in sandy bottoms without the need for expensive modern anchor replacements.14:05 The process involves grinding the anchor surface to bare metal, arc-welding the steel point on both sides, and smoothing the weld with a grinder for a finished appearance.15:41 Beyond ground tackle, the refit includes installing a new boarding step, painting the boat's name, and cleaning the 105-liter water tank.0:34 The owner also fabricates custom interior storage pockets and installs thermal reflective material to manage cabin temperature.4:52 Welding a steel point to a CQR anchor fluke forces the tip into the seabed, effectively preventing the anchor from dragging during the initial set.16:52

Båter i denne videoen

Mer fra VOILIER ODIN

Sailing under asymmetric spinnaker with a Sun Odysseyaug. 2026TOP NAVIGATION - WORTH REPEATING WITHOUT HESITATIONaug. 2026WHY I'M MOVING BACK TO FRANCEjuli 2026THIS IS ALSO WHAT BOAT LIFE IS LIKEjuni 2026

Fra VOILIER ODIN – se kanalens båt, mannskap og alle analyserte videoer.

The Sailing Directory Newsletter

Én e-post med flåtens beste funn – øyeblikkene, båtene og historiene som er verdt din seertid. Skriv inn din egen adresse for å få din egen kopi.