BoatsEd Hoppen Minto

Ed Hoppen Minto

Cat (Marconi) · Daggerboard · First built 1960

A lightweight, high-performance Marconi-rigged dinghy with a long production history spanning from 1960 to 2012

Designed by Heine Dole.

LOA
Beam
Displacement
Hull type
Daggerboard

Is it for you?

Character

Where this design lands on the numbers a shopper trusts — read straight from her own ratios.

TrailerableBeam 1.30 m — inside the 2.55 m no-permit tow width across most of Europe, and the 2.59 m US and Canadian limit. About 58 kg of hull, so roughly 650 kg on a trailer: check that against your own towing rating.Ramp-launchableAbout 58 kg of hull, with a keel that raises or a draft shallow enough to float off a trailer — she can go back on the trailer at the ramp, not only into the water.Shoal draftDraws 0.46 m, board up where she has one — creeks, sandbars and thin anchorages most keels have to stay out of.
CoastalBluewater

At 3.38 she sits above the 2.0 line — beamy for her weight, and happiest coastal.

Capsize screening 3.38
EasygoingPowered-up

30.4 — a lot of sail for her weight; powered-up and eager, a real performer.

Sail area / displacement 30.4

Powered-up and quick to accelerate — this one likes to sail.

The record

Full specifications

The complete reference set — tap any figure to switch between metric and imperial.

Dimensions
Weights
Rig & sail area
Rig
Cat (Marconi)
Ratios
SA / displacement
30.4
Capsize screening
3.38
Hull
Hull type
Daggerboard
Construction
Fiberglass
Production
Years built
First built 1960
Designer
Heine Dole
Builder
Ed Hoppen, Eddon Boat Yard, Ranger Fiberglass Boats

Boats like this, on the water

Nobody has filmed this one — but these are close.

Comparable boats the fleet has on camera: same type, within a quarter of her length. Open the boat, or watch the video — a timestamp means she only appears in passing.

McDougall Waszp3.35 mSame hull family0.6 m longerA one-design foiling dinghy featuring wings and an unstayed rig, built in the thousands for high-performance racing
Topper International Topper3.40 mSame hull family0.6 m longerAn Ian Proctor-designed polypropylene dinghy featuring an unstayed cat rig and three versatile sail-area configurations
Newport Boats Flipper2.44 mSame hull family0.3 m shorterAn ultra-light 36kg cat-rigged dinghy designed by Carter Pyle and Joe Quigg for high-performance, unstayed sailing

The family

Related models

The designs closest to hers — usually the rest of the builder's range, sometimes the same hull sold under another name.

Keep looking

Nothing filmed of this one yet

Two ways to keep looking — both search what the fleet has actually recorded.

The newsletter

New boats, new stories, from everywhere.

One email from the fleet — boats newly added, videos newly analyzed. No noise.

Report an issue