BoatsNorth Wind 435

North Wind 435

Masthead Sloop · Fin With Rudder On Skeg · 1980–1998

A long-running 13-metre masthead sloop with a moderate displacement-to-ballast ratio, built for offshore cruising

Designed by Angus Primrose.

LOA
Beam
Draft (max)
Displacement
Ballast
Hull type
Fin With Rudder On Skeg

Is it for you?

Character

Where this design lands on the numbers a shopper trusts — read straight from her own ratios.

LivelySea-kindly

Her moderate displacement on a moderate beam gives 26 — a moderate, middle-of-the-road motion.

Comfort ratio 26
CoastalBluewater

1.94 — just under the 2.0 offshore line; her beam is modest for her weight.

Capsize screening 1.94
LightHeavy

200 — moderately heavy for her waterline, a balanced cruising weight.

Displacement / length 200
EasygoingPowered-up

16.7 — moderate power for her weight; steady, all-round performance.

Sail area / displacement 16.7
TenderStiff

38% of her weight is ballast — moderately stiff, a middle-of-the-road stability.

Ballast 38%

A capable cruiser that sits just inside the offshore line — coastal work with real passages in her.

  • Draws less than ~85% of boats her size on file

Compared with 2538 boats of the same type within a quarter of her length.

The record

Full specifications

The complete reference set — tap any figure to switch between metric and imperial.

Dimensions
Weights
Ballast / displacement
37.8%
Rig & sail area
Rig
Masthead Sloop
Ratios
SA / displacement
16.7
Displacement / length
200.2
Comfort ratio
26.3
Capsize screening
1.94
Hull speed
8.0 kn
Pounds / inch immersion
1658
Hull
Hull type
Fin with rudder on skeg
Construction
Fiberglass
Ballast type
Iron
Production
Years built
1980–1998
Designer
Angus Primrose
Builder
North Wind

Boats like this, on the water

Nobody has filmed this one — but these are close.

Comparable boats the fleet has on camera: same type, within a quarter of her length. Open the boat, or watch the video — a timestamp means she only appears in passing.

Beneteau Oceanis 42 CC13.23 mSame hull familyNear-identical lengthA center-cockpit cutter designed by Groupe Finot, featuring a wing keel for shoal draft and a stable, comfortable motion
Beneteau 42 CC13.23 mSame hull familyNear-identical lengthA cutter-rigged cruiser produced from 2003 to 2007, widely utilized in the charter trade for its accessible layout
Sweden Yachts 4213.25 mSame hull familyNear-identical lengthA 13.25-metre fractional sloop featuring a 2.1-metre bulb keel and a 40% ballast ratio for balanced offshore performance
Ct-44 (Pilot House)13.16 mSame hull familyNear-identical lengthA Tanton-designed pilot house cutter featuring a fin keel and skeg-mounted rudder for offshore stability
Hunter Marine 42013.23 mSame hull familyNear-identical lengthA 42-foot cruiser with a performance-oriented fin keel and spade rudder, built for efficient coastal and offshore travel
Dufour Yachts 430 Grand Large13.24 mSame hull familyNear-identical lengthA 2019 Umberto Felci design with a 2.1-meter bulb keel and a high sail-area-to-displacement ratio for spirited cruising

The family

Related models

The designs closest to hers — usually the rest of the builder's range, sometimes the same hull sold under another name.

Keep looking

Nothing filmed of this one yet

Two ways to keep looking — both search what the fleet has actually recorded.

The newsletter

New boats, new stories, from everywhere.

One email from the fleet — boats newly added, videos newly analyzed. No noise.

Report an issue