Sailing Avanti · βίντεο

Τι καλύπτει αυτό το βίντεο

Performing a 600-hour service on a Volvo Penta D2-50 engine involves extracting 10 liters of engine oil using a 12-volt pump and replacing the raw water impeller after closing the seawater inlet seacocks.0:14 The oil filter is replaced by hand-tightening a new unit coated with a thin film of oil, followed by refilling the engine with Shell Rimula R4X 15W-40 mineral oil.2:42 Rigging maintenance includes inspecting chain plates behind the forward bulkhead and climbing the mast using two Dyneema halyards for safety to check standing rigging, pins, and split pins for chafe or damage.5:30 Steering cable replacement requires removing the compass to thread new cables through the pedestal, securing them to the rudder quadrant with Crosby clamps, and greasing the wheel sprocket and chain.10:51 While sourcing boat parts in Bali, the crew also performed these maintenance tasks in Lombok to prepare for an Indian Ocean passage.13:01 Regular inspection of standing rigging and steering components prevents failure during long-distance cruising.

Περισσότερα από το Sailing Avanti

CIRCUMNAVIGATED - WE DID IT EP136Ιαν 2025WILD COAST sailing EP135Ιαν 2025Sailing from Richards Bay to Durban in December EP134Ιαν 2025Trying to leave Richardsbay EP133Δεκ 2024

Από Sailing Avanti — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.

The Sailing Directory Newsletter

Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.