Sailing Avantividéo
Finishing boat jobs and searching for parts EP106
17 mai 2024 · 15 min · 540 vues · Bali
Ce que couvre cette vidéo
Performing a 600-hour service on a Volvo Penta D2-50 engine involves extracting 10 liters of engine oil using a 12-volt pump and replacing the raw water impeller after closing the seawater inlet seacocks.0:14 The oil filter is replaced by hand-tightening a new unit coated with a thin film of oil, followed by refilling the engine with Shell Rimula R4X 15W-40 mineral oil.2:42 Rigging maintenance includes inspecting chain plates behind the forward bulkhead and climbing the mast using two Dyneema halyards for safety to check standing rigging, pins, and split pins for chafe or damage.5:30 Steering cable replacement requires removing the compass to thread new cables through the pedestal, securing them to the rudder quadrant with Crosby clamps, and greasing the wheel sprocket and chain.10:51 While sourcing boat parts in Bali, the crew also performed these maintenance tasks in Lombok to prepare for an Indian Ocean passage.13:01 Regular inspection of standing rigging and steering components prevents failure during long-distance cruising.
Plus de vidéos de Sailing Avanti
De Sailing Avanti — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.
The Sailing Directory Newsletter
Un e-mail avec les meilleures trouvailles de la flotte — les moments, les bateaux et les histoires qui valent la peine d'être regardés. Entrez votre adresse pour recevoir votre propre exemplaire.