Sven Yrvind · βίντεο

Τι καλύπτει αυτό το βίντεο

Sven Yrvind laminates the port side of his small boat's keels using epoxy and glass fiber.▶ 0:03 He grinds the keel surfaces to prepare them for bonding, filling small gaps with epoxy to ensure a smooth profile.▶ 0:03 He applies two layers of glass fiber to the center of the keels for increased strength and one layer to the ends for protection.▶ 2:03 Masking tape marks the boundary for the fiberglass application to prevent excess material buildup.▶ 1:31 Once the epoxy cures, he plans to remove the temporary screws used for positioning and rotate the boat to repeat the lamination process on the starboard side.▶ 2:28 Proper surface preparation and strategic layering of fiberglass provide structural integrity and abrasion resistance for the keels.

Περισσότερα από το Sven Yrvind

Kai the bow paddle.Ιουλ 2026About safety.Ιουλ 2026My solution to crossing the Doldrums without using an engine.Ιουλ 2026Goose Barnacles Remower.Ιουλ 2026

Από Sven Yrvind — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.