EXPLORIST life Mobile Marine & Off-Grid Electrical · βίντεο

Τι καλύπτει αυτό το βίντεο

Nate installs a Flatline nudge bar on a Ford Transit campervan to provide a mounting point for auxiliary lighting.0:05 The process begins by removing the license plate and its plastic mount, followed by cleaning the bumper area.0:34 Using a 13mm socket, Nate removes two existing bolts from the front bumper to prepare for the bar installation.0:46 The assembly requires two plate spacers, two washers, and two hex head screws, all secured with Loctite.0:59 The nudge bar mounts over the spacers, with the spacer nubs seating into the bumper.1:14 A lower front plate attaches to the nudge bar using four quarter-by-20 three-quarter-inch button head screws.2:03 To secure the bottom of the assembly, Nate removes two splash guard bolts with a 10mm socket, applies Loctite, and reinstalls them through the new plate.1:50 The license plate mounts to the front of the bar using the remaining hardware.3:00 The entire installation takes 29 minutes.3:14

Περισσότερα από το EXPLORIST life Mobile Marine & Off-Grid Electrical

Battery Monitor Troubleshooting Tips - Battery Monitoring Playlist | Ep: 3/3Δεκ 2025Bluetooth vs Wired Battery Monitoring | Battery Monitoring Playlist | Ep: 2/3Δεκ 2025How to Wire a REDARC BCDC Alpha 100 R (Step-by-Step Install Guide)Δεκ 2025Upgrading a Living Quarters Horse Trailer With Lithium Power! (400W Solar + SOK Battery Install)Νοε 2025

Από EXPLORIST life Mobile Marine & Off-Grid Electrical — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.

The Sailing Directory Newsletter

Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.