Entre Terras e Mares · βίντεο

Τι καλύπτει αυτό το βίντεο

The owner of a boat under construction re-installs polycarbonate windows after the initial adhesive bond failed.0:16 The original installation used 3M VHB double-sided tape for structural fixation and Down Seal polyurethane for perimeter sealing.0:43 The bond failed because the sealant overlapped the tape before the polycarbonate made contact, preventing the tape from adhering properly to the window surface.0:58 Additionally, the curvature of the hull created tension that pulled the window away from the frame at the point of the sealant overlap.3:38 To correct the installation, the crew removed the old adhesive, cleaned the surfaces, and applied the 3M VHB tape first to secure the window.4:17 They applied the sealant only after the window was fully seated to ensure the tape provided the primary structural bond.9:08 The crew successfully re-installed three windows using this revised method.13:17 Proper sequencing of tape application before sealant prevents bond failure in frameless polycarbonate window installations.

Περισσότερα από το Entre Terras e Mares

90% of the STRUCTURE is READY S1.ep 183Ιουλ 2026WE FINISHED the bow cabin LAMINATE ! S1.ep182Ιουν 2026WE DID IT, WE FINISHED PART OF THE FORMICA IN THE BOW SUITE S1.ep 181Ιουν 2026This week the focus was on something elseΙουν 2026

Από Entre Terras e Mares — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.

The Sailing Directory Newsletter

Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.