Entre Terras e Mares · video

Hva denne videoen dekker

The owner of a boat under construction re-installs polycarbonate windows after the initial adhesive bond failed.0:16 The original installation used 3M VHB double-sided tape for structural fixation and Down Seal polyurethane for perimeter sealing.0:43 The bond failed because the sealant overlapped the tape before the polycarbonate made contact, preventing the tape from adhering properly to the window surface.0:58 Additionally, the curvature of the hull created tension that pulled the window away from the frame at the point of the sealant overlap.3:38 To correct the installation, the crew removed the old adhesive, cleaned the surfaces, and applied the 3M VHB tape first to secure the window.4:17 They applied the sealant only after the window was fully seated to ensure the tape provided the primary structural bond.9:08 The crew successfully re-installed three windows using this revised method.13:17 Proper sequencing of tape application before sealant prevents bond failure in frameless polycarbonate window installations.

Mer fra Entre Terras e Mares

90% of the STRUCTURE is READY S1.ep 183juli 2026WE FINISHED the bow cabin LAMINATE ! S1.ep182juni 2026WE DID IT, WE FINISHED PART OF THE FORMICA IN THE BOW SUITE S1.ep 181juni 2026This week the focus was on something elsejuni 2026

Fra Entre Terras e Mares – se kanalens båt, mannskap og alle analyserte videoer.

The Sailing Directory Newsletter

Én e-post med flåtens beste funn – øyeblikkene, båtene og historiene som er verdt din seertid. Skriv inn din egen adresse for å få din egen kopi.