Velero Regina · βίντεο

Τι καλύπτει αυτό το βίντεο

Javi aboard Regina navigated a reef-strewn entrance to Bahía Mahalt without a working depth sounder, relying on Navionics charts, which he reports were accurate enough to get through safely.▶ 0:03 Back at anchor, he traces the fault to a broken section of transducer cable running from a hull fitting (pasacascos) through the boat to the depth instrument — the most awkward stretch to access because it threads behind the instrument panel, behind all the seat backs, and through the hull penetration.▶ 1:15 He replaces the damaged cable segment, bench-testing the new cable at the terminal block before routing it, confirming 2.5 metres on the display.▶ 4:27 After routing and sealing the connection with self-amalgamating tape, the instrument goes dead again.▶ 11:20 The fault turns out to be a connector that had worked loose during the final tidy-up — reseating it restores the reading.▶ 12:07 The repair also touches on a mismatched connector: the depth instrument was bought separately to replace a Tridata unit, and its plug had already been modified with a DIY adapter rather than cutting the original connector.▶ 5:52 The episode confirms that testing a cable repair before final installation is essential, because a loose connector after buttoning everything up is harder to find than the original fault.

Περισσότερα από το Velero Regina

5000 SubscribersΙουν 2026Atlantic Crossing from West to East. Day 10Ιουν 2026Atlantic crossing to Europe. Day 3Ιουν 2026Heading to the AzoresΙουν 2026

Από Velero Regina — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.