Velero Regina · vídeo

O que este vídeo aborda

Javi aboard Regina navigated a reef-strewn entrance to Bahía Mahalt without a working depth sounder, relying on Navionics charts, which he reports were accurate enough to get through safely.▶ 0:03 Back at anchor, he traces the fault to a broken section of transducer cable running from a hull fitting (pasacascos) through the boat to the depth instrument — the most awkward stretch to access because it threads behind the instrument panel, behind all the seat backs, and through the hull penetration.▶ 1:15 He replaces the damaged cable segment, bench-testing the new cable at the terminal block before routing it, confirming 2.5 metres on the display.▶ 4:27 After routing and sealing the connection with self-amalgamating tape, the instrument goes dead again.▶ 11:20 The fault turns out to be a connector that had worked loose during the final tidy-up — reseating it restores the reading.▶ 12:07 The repair also touches on a mismatched connector: the depth instrument was bought separately to replace a Tridata unit, and its plug had already been modified with a DIY adapter rather than cutting the original connector.▶ 5:52 The episode confirms that testing a cable repair before final installation is essential, because a loose connector after buttoning everything up is harder to find than the original fault.

Mais de Velero Regina

5000 Subscribers06/2026Atlantic Crossing from West to East. Day 1006/2026Atlantic crossing to Europe. Day 306/2026Heading to the Azores06/2026

De Velero Regina — veja o barco, a tripulação e todos os vídeos analisados do canal.