WhiteSpotPirates · βίντεο

Τι καλύπτει αυτό το βίντεο

Nike installs a Pelagic autopilot system on the sailboat Carl, currently moored in Bahia Caracas, Ecuador.6:12 The installation involves mounting a control unit and a tiller actuator, which share a single power source and control interface.6:35 To minimize deck penetrations, the project utilizes existing holes where possible, though additional drilling is required for the control box and a Garmin compass, which must remain at least six inches from the pilot unit.8:03 The process requires removing interior wall panels and insulation to route cabling from the control box through the aft cabin and beneath the cockpit bench to the motor box.11:43 While the control unit successfully powers on, the final installation of the wind vane actuator is delayed pending technical recommendations from Peter Fertmann of Windpilot Pacific to prevent potential damage to the wind vane assembly.13:19

Περισσότερα από το WhiteSpotPirates

Boat Search in Belgium: Canalboat Nr. 4 and exploring Antwerp & BruggeΑυγ 2026Dutch Barge Life in Europe? YOU had QUESTIONS about my life-changing decision. Here's some answers!Αυγ 2026Searching for an Old Dutch Barge in the Netherlands to become my Floating Tiny HouseΑυγ 2026I’m going to buy a dutch barge (and I feel unprepared)Ιουλ 2026

Από WhiteSpotPirates — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.

The Sailing Directory Newsletter

Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.