WhiteSpotPirates · vidéo

Ce que couvre cette vidéo

Nike installs a Pelagic autopilot system on the sailboat Carl, currently moored in Bahia Caracas, Ecuador.6:12 The installation involves mounting a control unit and a tiller actuator, which share a single power source and control interface.6:35 To minimize deck penetrations, the project utilizes existing holes where possible, though additional drilling is required for the control box and a Garmin compass, which must remain at least six inches from the pilot unit.8:03 The process requires removing interior wall panels and insulation to route cabling from the control box through the aft cabin and beneath the cockpit bench to the motor box.11:43 While the control unit successfully powers on, the final installation of the wind vane actuator is delayed pending technical recommendations from Peter Fertmann of Windpilot Pacific to prevent potential damage to the wind vane assembly.13:19

Plus de vidéos de WhiteSpotPirates

Boat Search in Belgium: Canalboat Nr. 4 and exploring Antwerp & Bruggeaoût 2026Dutch Barge Life in Europe? YOU had QUESTIONS about my life-changing decision. Here's some answers!août 2026Searching for an Old Dutch Barge in the Netherlands to become my Floating Tiny Houseaoût 2026I’m going to buy a dutch barge (and I feel unprepared)juil. 2026

De WhiteSpotPirates — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.

The Sailing Directory Newsletter

Un e-mail avec les meilleures trouvailles de la flotte — les moments, les bateaux et les histoires qui valent la peine d'être regardés. Entrez votre adresse pour recevoir votre propre exemplaire.