Sailing NV · βίντεο

Τι καλύπτει αυτό το βίντεο

The crew of NV installs a new 60-horsepower Nanni N4.65 diesel engine into their boat, utilizing a yard crane and a custom-rigged pulley system to maneuver the 300-kilogram unit through the companionway.▶ 0:12 To facilitate the lift, the team secures a heavy steel beam to the bimini structure using Spectra rope, creating a load-tested anchor point for a chain block.▶ 1:53 Because the companionway geometry prevents a direct vertical drop, the crew rigs a secondary pulley system at the base of the mast to pull the engine forward during its descent into the saloon.▶ 9:33 They maintain stability by keeping the engine bolted to its shipping pallet during the initial transfer, later using the pallet as a temporary base inside the boat when the chain block reaches its maximum extension.▶ 4:27 Final alignment of the engine shaft to the ZF gearbox requires millimeter-precise adjustments using levers to engage the splines.▶ 17:06 The installation concludes with the engine secured to a custom carbon fiber bed, pending final connections for the exhaust, fuel lines, and control panel.▶ 21:53

Περισσότερα από το Sailing NV

The Adventure Is About To Get Bigger | S3 Ep 15Ιουν 2026We Found Langkawi's Hidden Paradise | S3 Ep 14Ιουν 2026Should We Swap Our Sailboat for One of These? | S3 Ep 13Ιουν 2026Family Sailing Through the Singapore & Malacca Straits | S3 Ep 12Μαΐ 2026

Από Sailing NV — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.