Acorn To Arabella · βίντεο

Τι καλύπτει αυτό το βίντεο

Fabricating a wooden main boom and bowsprit for a custom boat requires tapering square spruce stock into an octagonal shape before final rounding. The process begins by marking a center line on the timber using a diagonal measurement trick to avoid complex math.4:15 To achieve a smooth taper, the builder identifies the thickest point of the spar and marks the desired diameters at the ends and center.11:47 Using a Festool track as a straightedge, the builder draws lines to connect these points, ensuring the taper remains fair.14:53 After bandsawing the initial taper, the builder uses a jointer plane to smooth the faces before marking 45-degree angles to create an eight-sided profile.20:50 This octagonal shape serves as the transition point before final rounding. The crew also removes bronze fittings from an old bowsprit, using a wooden mallet to break the bond of the original bedding compound without damaging the metal.26:20 Careful layout and marking of all cut lines on the timber minimize guesswork during the shaping process.15:07

Περισσότερα από το Acorn To Arabella

Upgrading the Rudder and Another Trek To The CliffΑυγ 2026We're Climbing a Wall No One Has Ever Climbed Before | Rock Climbing on Newfoundland's South CoastΙουλ 2026Exploring Newfoundland's Unclimbed Coastal Cliffs by SailboatΙουλ 2026Fjord Hopping | Arabella Sails East Toward The NuddickΙουλ 2026

Από Acorn To Arabella — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.

The Sailing Directory Newsletter

Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.