Acorn To Arabella · video

Hva denne videoen dekker

Fabricating a wooden main boom and bowsprit for a custom boat requires tapering square spruce stock into an octagonal shape before final rounding. The process begins by marking a center line on the timber using a diagonal measurement trick to avoid complex math.4:15 To achieve a smooth taper, the builder identifies the thickest point of the spar and marks the desired diameters at the ends and center.11:47 Using a Festool track as a straightedge, the builder draws lines to connect these points, ensuring the taper remains fair.14:53 After bandsawing the initial taper, the builder uses a jointer plane to smooth the faces before marking 45-degree angles to create an eight-sided profile.20:50 This octagonal shape serves as the transition point before final rounding. The crew also removes bronze fittings from an old bowsprit, using a wooden mallet to break the bond of the original bedding compound without damaging the metal.26:20 Careful layout and marking of all cut lines on the timber minimize guesswork during the shaping process.15:07

Mer fra Acorn To Arabella

Upgrading the Rudder and Another Trek To The Cliffaug. 2026We're Climbing a Wall No One Has Ever Climbed Before | Rock Climbing on Newfoundland's South Coastjuli 2026Exploring Newfoundland's Unclimbed Coastal Cliffs by Sailboatjuli 2026Fjord Hopping | Arabella Sails East Toward The Nuddickjuli 2026

Fra Acorn To Arabella – se kanalens båt, mannskap og alle analyserte videoer.

The Sailing Directory Newsletter

Én e-post med flåtens beste funn – øyeblikkene, båtene og historiene som er verdt din seertid. Skriv inn din egen adresse for å få din egen kopi.