Sailing Uma · βίντεο

Τι καλύπτει αυτό το βίντεο

The crew of the sailboat Uma prepares the interior for priming by installing oak strips and reinforcing hull sections with 10mm foam.0:49 After identifying a measurement error that left mini bulkheads misaligned with the boat's centerline, the team uses a laser to verify the correct orientation and glues oak strips to the bulkheads to fill the resulting gaps.8:11 They use vinyl ester resin mixed with filler to bond the foam and wood, noting that the resin's color change upon catalysis helps distinguish pre-mixed batches.2:36 To prevent future squeaking and cracking as the hull flexes, the crew seals non-structural joints between cabinets and the hull with Sikaflex, creating a flexible buffer.19:01 They also install small drainage tubes at the base of sealed cabinets to allow moisture to reach the bilge.19:46 The project concludes with the installation of all plywood face frames and tertiary bulkheads, leaving only final sanding and fairing before the application of primer.25:23

Περισσότερα από το Sailing Uma

Solar Sponsor Backed Out Before Sailing Around the World !Σεπ 2026Our boat won’t look the same after this | Step 495Αυγ 2026The ONE Thing We Disagreed on This Entire Refit | Step 494Αυγ 2026We Owe You The Full StoryΙουλ 2026

Από Sailing Uma — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.

The Sailing Directory Newsletter

Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.