Sailing Uma · vidéo

Ce que couvre cette vidéo

The crew of the sailboat Uma prepares the interior for priming by installing oak strips and reinforcing hull sections with 10mm foam.0:49 After identifying a measurement error that left mini bulkheads misaligned with the boat's centerline, the team uses a laser to verify the correct orientation and glues oak strips to the bulkheads to fill the resulting gaps.8:11 They use vinyl ester resin mixed with filler to bond the foam and wood, noting that the resin's color change upon catalysis helps distinguish pre-mixed batches.2:36 To prevent future squeaking and cracking as the hull flexes, the crew seals non-structural joints between cabinets and the hull with Sikaflex, creating a flexible buffer.19:01 They also install small drainage tubes at the base of sealed cabinets to allow moisture to reach the bilge.19:46 The project concludes with the installation of all plywood face frames and tertiary bulkheads, leaving only final sanding and fairing before the application of primer.25:23

Plus de vidéos de Sailing Uma

Solar Sponsor Backed Out Before Sailing Around the World !sept. 2026Our boat won’t look the same after this | Step 495août 2026The ONE Thing We Disagreed on This Entire Refit | Step 494août 2026We Owe You The Full Storyjuil. 2026

De Sailing Uma — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.

The Sailing Directory Newsletter

Un e-mail avec les meilleures trouvailles de la flotte — les moments, les bateaux et les histoires qui valent la peine d'être regardés. Entrez votre adresse pour recevoir votre propre exemplaire.