Sven Yrvind · βίντεο

Τι καλύπτει αυτό το βίντεο

Sven Yrvind prepares to mount a 74.5-kilogram keel to his boat hull using a high-density, submarine-grade material for structural reinforcement.▶ 0:03 He distributes the keel's weight across 26 individual attachment points, calculating a load of approximately 4 kilograms per screw to prevent stress concentrations on the Divinycell H core.▶ 5:46 To ensure a secure bond, he drills and countersinks the mounting holes, then degreases all hardware and surfaces with acetone to remove contaminants.▶ 10:35 He rejects suggestions to use larger-diameter fasteners, noting that the hull laminate would require additional reinforcement to handle the increased point-loading, whereas his current method spreads the force across a larger surface area.▶ 6:50 After verifying the fit of the keel pieces and preparing the epoxy, he confirms the alignment is ready for final bonding.▶ 9:43 The project demonstrates that distributing structural loads across multiple small-diameter fasteners and maximizing surface area for epoxy adhesion provides sufficient strength for a lightweight keel assembly.

Περισσότερα από το Sven Yrvind

Kai the bow paddle.Ιουλ 2026About safety.Ιουλ 2026My solution to crossing the Doldrums without using an engine.Ιουλ 2026Goose Barnacles Remower.Ιουλ 2026

Από Sven Yrvind — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.