Sailing Into the Mystic · βίντεο

Τι καλύπτει αυτό το βίντεο

Installing a 120-amp Balmar alternator on a 1988 Irwin requires a serpentine belt conversion and specific wiring for an external regulator. To protect the lithium house battery, the system uses a DC-to-DC charger that draws from the AGM start battery, which the alternator charges directly.▶ 1:38 When installing the new alternator, apply Tef-Gel to all contact points between dissimilar metals to prevent corrosion and use blue Loctite on mounting bolts.▶ 3:01 The Balmar 618 regulator requires a battery sense wire connected to the positive terminal of the house battery to accurately monitor voltage.▶ 7:18 Wiring the regulator involves connecting the ignition input and dash lamp signal from the existing Yanmar harness to the regulator’s designated pins.▶ 11:26 After installation, the regulator must be programmed for the specific battery chemistry, such as AGM, and the field output can be reduced to extend the alternator's lifespan.▶ 12:12 Proper cable sizing, high-quality marine lugs, and correct crimping are essential for system reliability.▶ 18:46

Περισσότερα από το Sailing Into the Mystic

Sailing the Baja Coast and All He Wants is Tacos and Beer [Ep 61]Ιουλ 2026A Mistake A New Cruiser Can Make with Their Boom [Ep 60]Ιουν 2026Ep59 Mast Emergency During the Crossing to Cedros IslandΙουν 2026Our Fight for Justice After the StabbingΙουν 2026

Από Sailing Into the Mystic — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.