RAN Sailing · βίντεο

Τι καλύπτει αυτό το βίντεο

Johan and Malin encapsulate the floor beams of their 50-foot boat hull using 600g fiberglass cloth and epoxy.2:46 To ensure the fiberglass conforms to the complex shapes of the beams without air bubbles or gaps, they employ a vacuum bagging process.6:26 The layup sequence includes applying three layers of fiberglass, followed by a layer of peel ply, a perforated release film, a breather felt, and a vacuum bag sealed with butyl tape.8:21 Because of limited vacuum bagging supplies, they laminate the beams in alternating sequences to avoid stepping on uncured epoxy.7:11 Johan notes that the sapele wood used for the floor beams darkens significantly and turns deep red when coated with clear epoxy, a characteristic that influenced their decision to exclude the timber from the boat's interior.17:10 While waiting for additional vacuum materials, Johan prepares to cut the first bulkheads using a Shaper CNC router to verify the hull's dimensions against 3D design files.15:48

Περισσότερα από το RAN Sailing

Something's Not Right Here! Building Our 52ft Sailboat - Ep. 502Σεπ 2026This Is Where Boat Builds Break People - Ep. 501 Ran SailingΑυγ 2026Our 52ft Sailboat Build Reaches Another Milestone! - Ep. 500 Ran SailingΑυγ 2026How Many Hatches Does a 52ft Sailboat Need? - Ep. 499 Ran SailingΑυγ 2026

Από RAN Sailing — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.

The Sailing Directory Newsletter

Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.