Acorn To Arabellaβίντεο

I Had 2 Hours and a Pile of Scrap Canvas… So I Built This

29 Μαΐου 2026 · 13 λεπτά · 12K προβολές

Τι καλύπτει αυτό το βίντεο

Steve builds a custom rope bag for Arabella's 100-foot nylon anchor rode using scrap canvas offcuts, replacing a nylon stuff sack that lacked drainage, handles, and a way to secure the bitter-end loop.0:20

The new bag is wider and squatter than the original — closer to bucket-shaped — with a mesh bottom panel for drainage, a webbing handle on the bottom, a second handle on the side, and a clip-and-webbing keeper at the top that holds the rode's eye splice exposed and ready to grab.1:54 A folded strip of canvas sewn around the drawstring opening, with webbing chafe caps at each end, cinches the top shut.2:26 Steve threads black thread for the structural bar-tack stitching on the load-bearing handles, then winds a fresh blue bobbin to finish the assembly seams.4:18 He flakes the rode into the finished bag rather than coiling it, noting that flaked line runs out cleanly with almost no risk of tangling.11:21 The bag fits the rode snugly — Steve notes he could have cut it slightly larger — but drains, carries easily, and keeps the loop clipped and accessible.12:26

Παρακολουθήστε στο YouTube

Περισσότερα από το Acorn To Arabella

Upgrading the Rudder and Another Trek To The CliffΑυγ 2026We're Climbing a Wall No One Has Ever Climbed Before | Rock Climbing on Newfoundland's South CoastΙουλ 2026Exploring Newfoundland's Unclimbed Coastal Cliffs by SailboatΙουλ 2026Fjord Hopping | Arabella Sails East Toward The NuddickΙουλ 2026

Από Acorn To Arabella — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.

The Sailing Directory Newsletter

Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.

Αναφορά προβλήματος