Acorn To Arabella · vídeo

O que este vídeo aborda

Steve builds a custom rope bag for Arabella's 100-foot nylon anchor rode using scrap canvas offcuts, replacing a nylon stuff sack that lacked drainage, handles, and a way to secure the bitter-end loop.▶ 0:20 The new bag is wider and squatter than the original — closer to bucket-shaped — with a mesh bottom panel for drainage, a webbing handle on the bottom, a second handle on the side, and a clip-and-webbing keeper at the top that holds the rode's eye splice exposed and ready to grab.▶ 1:54 A folded strip of canvas sewn around the drawstring opening, with webbing chafe caps at each end, cinches the top shut.▶ 2:26 Steve threads black thread for the structural bar-tack stitching on the load-bearing handles, then winds a fresh blue bobbin to finish the assembly seams.▶ 4:18 He flakes the rode into the finished bag rather than coiling it, noting that flaked line runs out cleanly with almost no risk of tangling.▶ 11:21 The bag fits the rode snugly — Steve notes he could have cut it slightly larger — but drains, carries easily, and keeps the loop clipped and accessible.▶ 12:26

Mais de Acorn To Arabella

Fjord Hopping | Arabella Sails East Toward The Nuddickjul. de 2026Replacing Victoria's 100+ Year Old Mahogany Transomjun. de 2026Haul Out, Paint, Launch | Arabella Heads for Newfoundland's South Coastjun. de 2026Back to the Woods That Built Arabellajun. de 2026

De Acorn To Arabella — veja o barco, a tripulação e cada vídeo analisado do canal.